Digital HiNote VP Series Port Replicator Drivers V 2.02   Jan 17,1997

This Update, contains enhanced drivers for the Digital HiNote VP 
and VP500 series Port Replicator with Network Interface Card (NIC). 

This driver update includes :
A. Improved printing performance for Windows V 3.x and DOS. 
B. Enhanced network performance for NDIS2 and NDIS3. 

Sections
1. How to update existing Port Replicator NIC Driver in Windows 95
2. Port Replicator with NIC printing considerations

Please refer to README.PDF file for other Operating System and Protocol 
information and installation instructions.

---------------------------------------------------------------------
1.    To Install Digital HiNote Series Network Port Replicator Driver
      Under Win '95.

 1).  Select Start from Win'95, select RUN, type A:\Win95\delinf.bat 
      (This deletes the .INF file which is necessary to properly 
      reinstall this driver on a WIndows 95 system)

 2).  Manually close the DOS window by clicking on the 'X' in the 
      top right corner of the DOS panel. You should be back to 
      the windows desktop.

 3).  Select from the desktop, (Control Panel, Network), and then 
      remove the Digital HiNote VP Series Port Replicator component
      if it has been previously installed.

 4).  Select from Win'95 Control Panel, Add New Hardware.

 5).  Click next.

 6).  Highlight on No to 'Search for new hardware;, click Next.

 7).  Select Network Adapter.
 
 8).  Click "Have Disk", directory is A:\win95, click OK. 

 9).  Click all the way to "Finish".

 10). The system will configure the Nic driver and the replicator.  It
      will ask for Win'95 CD to download network related files. You may
      specify "Windows\options\cabs" as a path to search for network 
      related files, if the CD is not available.


 11).  Click on Yes to restart the system, if replicator is not attached,
       select "No", select "Shutdown" at Start.
        
 12).  Attach the Replicator with Network connected.

 13).  Reboot the system.

   
-----------------------------------------------------------------
2.          Port Replicator with NIC considerations

Printing through Port Replicator (with NIC) Parallel Port:

If you connect the Epson P880A printer to Port Replicator’s
(with NIC) parallel port, you may experience print errors, 
such as missing blocks of text or graphics.  The print errors
will occur regardless of which of the two Network Drivers
(NDIS2 or NDIS3) you are using.  

Using The NDIS2 Network driver: 

If at the completion of a print job executed through the Port
Replicator’s (with NIC) parallel port, you then enter DOS mode,
some printers will cause a system lock at the DOS prompt.
Printers which are known to cause this problem are: 

                        	Epson P880A 
				Okidata OkiJet 2010
				Canon BJC610
				HP 660C